the procedure to putting a slide in a microscope is first you want to find what slide u want to use. Next you lower the stage, the next step is to put the slide on the stage of the micro scope. Fourth you use the clips and secure the slide. Next you use the big nob on the microscope to make the stage higher. Next you use the small nob to make fine adjustments to the stage. Lastly you turn the micro scope light on and look at your piece of mol or whatever it is.
The procedure for setting up a slide on a microscope is to first turn it on, second you make sure the stage is all the way down then you put the slide onto the stage then you hook it up so the microscope in holding the stage then you look through and adjust the microscope so you can see it clearly, then thats how you set it up.
The first thing you do is turn on the light, then put the slide in and adjust it as much as necessary. Then you switch the objective lens to the one of your choice, then you adjust the nosepiece as much as necessary, or until focused. Then once you are done viewing the slide you take out the slide and you turn off the light. And then you make the nosepiece go to its lowest level and you must switch the objective lens to the smallest one. That is the procedure for putting a slide on the microscope.
The procedure is; 1: Open your eyes and keep them open. 2: Take a slide out of the box full of slides. 3: Then you place the slide on the stage. 4: Secure the slide using the metal bars connected to the stage. 5: Turn on the light for the microscope. 6: Focus the lens so you can see correctly through the microscope 7: Look through the lens and do your own experiment.
First you have to put what you want to see under the microscope then zoom in or out by turning one of the wheels and at a certain place you will be able to see it easily.
First you want to grab your microscope and then you want to plug it in and then you want to turn it on the you want to grab your slide an put it under the microscope and then you want to focus your lens or clean them or move it around and then you look at whats inside of it and then you are done.
7 comments:
the procedure to putting a slide in a microscope is first you want to find what slide u want to use. Next you lower the stage, the next step is to put the slide on the stage of the micro scope. Fourth you use the clips and secure the slide. Next you use the big nob on the microscope to make the stage higher. Next you use the small nob to make fine adjustments to the stage. Lastly you turn the micro scope light on and look at your piece of mol or whatever it is.
The procedure for setting up a slide on a microscope is to first turn it on, second you make sure the stage is all the way down then you put the slide onto the stage then you hook it up so the microscope in holding the stage then you look through and adjust the microscope so you can see it clearly, then thats how you set it up.
The first thing you do is turn on the light, then put the slide in and adjust it as much as necessary. Then you switch the objective lens to the one of your choice, then you adjust the nosepiece as much as necessary, or until focused. Then once you are done viewing the slide you take out the slide and you turn off the light. And then you make the nosepiece go to its lowest level and you must switch the objective lens to the smallest one. That is the procedure for putting a slide on the microscope.
The procedure is; 1: Open your eyes and keep them open. 2: Take a slide out of the box full of slides. 3: Then you place the slide on the stage. 4: Secure the slide using the metal bars connected to the stage. 5: Turn on the light for the microscope. 6: Focus the lens so you can see correctly through the microscope 7: Look through the lens and do your own experiment.
First you have to put what you want to see under the microscope then zoom in or out by turning one of the wheels and at a certain place you will be able to see it easily.
First you want to grab your microscope and then you want to plug it in and then you want to turn it on the you want to grab your slide an put it under the microscope and then you want to focus your lens or clean them or move it around and then you look at whats inside of it and then you are done.
1. Pick a slide
2. Place it on the stage
3. Turn on the light on the microscope
4. Adjust the objective lens
5. Look through the eyepiece lens
Post a Comment